Autowatch Ghost Installation
Autowatch Ghost is a revolutionary immobiliser system that guards against key-cloning, hacking, and vehicle theft. It also helps reduce your insurance costs and may even be eligible for incentives.
Discreet and easy to use and simple to use, and easy to use, Ghost immobiliser is integrated into the vehicle's ECU. This means that it is impossible to start the engine without an encrypted PIN code.
TASSA Approved
If you want to protect your vehicle from being taken through key cloning, you should purchase the TASSA certified Autowatch Ghost immobiliser system. This is the most recent technology in car security. It stops thieves from stealing your key fobs and will also prevent your car from starting once your keys are cloned.
This next-generation device connects to your vehicle's CAN data network. A personalised PIN code is entered via the standard buttons on the dashboard or steering wheel. The Ghost will stop the engine from starting. It can be programmed using a variety of settings, such as Gear Change Blocking (vehicle-dependent), Stall on Start (vehicle-dependent) or Lock Gearbox. It is totally undetectable and does not utilize radio frequency signals, so that it cannot be detected by RF scanning equipment or a code grabber.
The Ghost is a weatherproof, tiny device and is completely sealed so that it can be hidden inside the vehicle or placed on the dashboard where it is virtually impossible for a burglar to locate. This is not an Thatcham Category Approved item, however it is recognized by insurance companies as a highly efficient anti-theft device. It also comes with 5 years warranty.
The TASSA procedure ensures that any work to install on the Ghost is carried out by a trained installer. This gives the insurer, the customer and police confidence in the quality of any installations undertaken. It will also guarantee that the installers follow the manufacturer's instructions and install the product in a safe and correct manner. Installers who are TASSA members are committed to excellence, and they want to contribute to the fight against criminality.
Compatible with a broad range of vehicles
The Autowatch Ghost 2 is a modern immobiliser designed to safeguard your vehicle from modern key copying. Its PIN code system is integrated into the ECU of your car, making it more difficult for thieves to clone keys or hack into the vehicle's system. The device is also discreet and is able to be easily installed in many vehicles such as minivans and sports automobiles. It's also weatherproof, and small enough to be hidden out of sight making it harder for thieves to find.
Installation of the Ghost is simple and does not require any additional wiring. It is compatible with a variety of vehicles and relies on the CAN data network of the vehicle to communicate with the vehicle. It can also be switched off or deactivated by using the main screen of the vehicle. The device is compatible with a variety of applications on mobile devices that allow you to control the security of your vehicle remotely.
The Ghost may have some issues after installation, despite its many benefits. These problems can be caused by a variety of causes including malfunctioning wiring or a non-compliant mobile app. In these cases, the best solution is to call an expert installer to fix the issue.
Another issue that users face is difficulty entering the Ghost's disarm sequence. This is usually due to users forgetting or not practising the proper sequence. The manual for the device has an emergency code which can be used in case of problems occur.
Distinction
Autowatch Ghost is an advanced and discreet security system that safeguards against theft of vehicles. The device is inaccessible to thieves and utilizes the CAN data network of your vehicle to function. It also has the ability to be activated by other security systems, such as alarms for cars, and provide real-time alerts to the owner. These features can assist police find your vehicle in case it is stolen.
The system can be set up within a matter of minutes and is compatible with a majority of vehicles. It is an TASSA approved aftermarket device that is compatible with vehicle trackers. Some insurance companies even recognize it. It's also tamper-proof and silent so criminals won't be able to hear its operation. The Ghost immobiliser is also programmable to require a PIN of up to twenty numbers. This makes it nearly impossible to guess the number.
Another benefit of the Ghost is that it is only activated when the vehicle is set to Service/Valet mode. This will prevent you from accidentally giving the PIN number to a mechanic or other person who may need access to the vehicle's computer system. The Ghost also has a five-year guarantee.
The Autowatch Ghost is an innovative immobiliser that can stop key cloning as well as ECU hacking and car theft. It's a CAN bus aftermarket device that's a great option for both new and old vehicles. It's simple to install and operates quietly. This makes it possible to be fitted in any vehicle without cutting wires. You can also change your pin with ease so that you only know it. The system also doesn't use codes-grabbing or RF scanning technology which means it's almost undetectable.
Simple to use
Autowatch Ghost is an innovative and effective security system designed to thwart vehicle theft by disabling the engine. It operates by using a code that is personalised by the vehicle owner. The code must be entered to allow the car to begin. ghost vehicle immobiliser advanced technology elevates the overall security of your vehicle and makes it a top option for many motorists. However, executing this installation requires careful preparation and attention to detail. This involves ensuring compatibility, relying on expert advice in compliance with laws and regulations, and fully understanding the Ghost II's operation functions. Making these factors a priority will ensure the installation is successful and has maximum functionality.
In contrast to conventional systems, the Ghost II is silent and is not able to be detected by thieves. It is also weatherproof and small making it difficult to gain entry into your vehicle. how much is a ghost immobiliser is also compatible with CAN and Lenastark, which allows it to be fitted in various vehicles. It can be used in vehicles where the battery has to be isolated for maintenance. The Ghost 2 has a Transport Mode which disables the device when your vehicle is being rented or loaned.
To use the Ghost 2, you must have a personal PIN to enter before starting the vehicle. Installers will assign the default code, but it is recommended to change it as soon as possible to ensure your safety. The device can enter sleep mode to save battery power, however, it will wake up when it detects an engine management signal. This feature can be disabled within the Settings menu. It is recommended to only use the Ghost immobiliser while your vehicle is being driven, and to always make sure to lock it when leaving it unattended.
Easy to install
The Autowatch Ghost II is an advanced security system that deters car theft by shutting down the vehicle's engine. It operates with a code that is unique to the owner of the vehicle, which makes it a potent deterrent. Installing this device requires a lot of attention to detail and meticulous preparation. By adhering to the legal guidelines and adhering to the laws, and relying on experts you can ensure the installation process is smooth and get the most out of this security solution.
This unique CANbus immobiliser from Autowatch is simple to install, and works quietly, so that criminals can't hear it operating. It makes use of CAN bus communications to communicate with the vehicle. Compatible with a wide variety of vehicles. It's a major breakthrough in the field of vehicle security. It also shields your vehicle from hacking, key cloning and theft of your car, since it won't start unless you have the proper pin code. It's weatherproof and small which makes it difficult for criminals to spot it or alter it.
You will need to locate the CAN High (CAN H) & the CAN Low (CAN L) Wires in the wiring schematic of your vehicle before you begin installing the Ghost Immobiliser. Connect the CAN high and CAN low wires to the ECU. You can find these wires under the dashboard or near the engine.
It is recommended to employ a certified and trusted installer for the installation of your Ghost immobiliser. This way, you can be certain that the system has been installed correctly and that it will not interfere with your vehicle's capabilities. The installer will also be able give you advice on how to best utilize the new device.